2011年10月10日 星期一

AEM High Volume Fuel Rail for Eclipse 4G63 高流量油軌

AEM High Volume Fuel Rail for 89 - 99 Eclipse 4G63, AEM官網產品說明 如下:
AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line. For users users who want to use custom fuel lines kit part #25-391 will adapt the ends of you fuel rail to -6 AN or 9/16”x18 fittings.

AEM Fuel Rail套件本身附的接頭是直接對應原廠燃油管路(Eclipse 4G63 Fuel Supply, 圖三的1及5), 不過考量到將來跟 Aeromotive Adjustable Fuel Pressure Regualtor Kit for Eclipse 4G63 燃油調壓閥 完美的銜接, 還準備了 AEM Fuel Rail AN Adapter 套件.
這次買的零件, AEM Fuel Rail本體、Earl's的AN轉接頭及墊圈、AEM Fuel Rail轉AN接頭套件.

AEM Fuel Rail本體, 上面已經裝上燃油壓力表及AN接頭的轉接頭.

另一個角度.

轉接AN油管所需的套件, 右下方的 Earl's 90度AN管, 是絕對必需品, 其他廠牌還未必能用, 其中奧妙之處等安裝時再說明.

其實以參號機目前的配置(FP Big28), 即使換上高cc數的 噴油嘴, 原廠油軌也足夠使用...
那為什麼要準備這組AEM Fuel Rail呢?
老實說, 只是手癢沒事找事做, 為了好看罷了, 哈~

擇日安裝上車.

------------- 分隔線 -------------
2014/11/16

安裝上車.

:)

沒有留言:

張貼留言