2014年2月21日 星期五

Torque Solution DriveShaft Carrier Bearing Support Bushings Install 傳動軸吊架固定座強化硬塑膠

兩年前(還是三年...)跟著 Rear Differential Bushing 後差速器墊圈 一起買的傳動軸吊架固定座強化硬塑膠, 一直放置沒裝上去, 雖然手上也有一組原廠的墊圈, 考慮了半天, 還是直接上改裝品試試, 原廠件就留著備料吧, 今天趁著車頂起來進行 油壓及油溫Sensor安裝 的時候來裝一裝.

本次的主角, Torque Solution Driveshaft Carrier Bearing Support Bushing.


包裝拆開長這樣.


下列是 Torque Solution官網 敘述:
Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with Delrin Polymer pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time.
 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight Delrin
-Less NVH than 6061 Billet
-Street and track torture tested
-Black anodized
-Life Time Warranty
-Made in USA


理面比較有趣的是它的材質, Delrin Polymer, 它不是優利膠, 而是一種強化塑膠(我不太確定, 化工專科的大大請幫忙), 原始的正式名稱是Polyoxymethylene, wiki上的敘述如下:
Polyoxymethylene (POM), also known as acetalpolyacetal and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction and excellent dimensional stability. As with many other synthetic polymers, it is produced by different chemical firms with slightly different formulas and sold variously by such names as Delrin, Celcon, Duracon and Hostaform.

Polyoxymethylene產品多數用在需要 高硬度/低摩擦力/完美尺寸穩定性的地方, 根據不同的化學組成, 可以產生不同的硬度變化, 而有不同的名稱, Delrin Polymer就是其中一種.

總而言之, 它的特點就是硬, 不變型, 在有扭力需求的車輛上可以發揮效用, 這組套件就是用在傳動軸的吊架固定座上.

傳動軸吊架有兩個, 紅線框出的地方的墊圈, 就是要換掉的部分.
前面.


後面.


換下來的墊圈, 看起來是還好, 但實際上它已經軟軟爛爛, 我想它在行駛途中一定是左搖右晃...


裝上的樣子, 傳動軸吊架備品也買了, 不過車上的看起來還好, 將來再換.


至於 Rear Differential Bushing 後差速器墊圈......

不知道甚麼時候才有機會裝.




沒有留言:

張貼留言