2014年9月4日 星期四

EXEDY MF01 Forged Chromoly Racing Flywheel 鍛造 鉻鉬鋼 輕量化飛輪

回到家看到桌上兩張紅單, 就知道這次又到了甚麼東西被進口課稅了.

EXEDY MF01 Forged Chromoly Racing Flywheel 鍛造鉻鉬鋼輕量化飛輪抵達. :)

先介紹一下EXEDY Forged Chromoly Racing Flywheel 鍛造鉻鉬鋼飛輪, 說明如下 (EXEDY 官網):
Forged Chromoly Flywheel
•Combination of low weight and high heat capacity
•Designed for Rally, Drag and hi-performance Street 
•Reduced weight and inertia means snappier throttle response and quicker shifting
•Designed to increase airflow to help cooling (most)
•One-piece flywheel - starter teeth machined in place
•Unlike an aluminum flywheel, ring gear can’t separate
•Unlike an aluminum flywheel, friction surface can’t warp
•May be resurfaced for future clutch service
•Tested up to 18,000 rpm without failure
•All EXEDY Chromoly Flywheels are SFI approved

Chromoly Flywheels  
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response.
Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel

SFI Approved,
Spec 1.1   Replacement Flywheels and Clutch Assemblies
Spec 1.2   Multiple Disc Clutch Assemblies
Spec 1.5   Multiple Disc Clutch Assemblies for Supercharged, Nitrous-Oxide Injected, and Turbocharged Vehicles

產品規格及適用車種明細如下(官網連結):

Eclipse 4G63 GSX專用, 單體重量12 lb, 雖不是市面上最輕的, 但比起原廠飛輪重達19 lb已是輕量不少, 但也符合街道適用的特性.
先前雖然買過ACT StreetLite Flywheel for 90-99 Eclipse 4G63 輕量化飛輪, 但後來也一直沒機會裝上就脫手了, 這次特別換了EXEDY來試試.
繼續開箱, MF 01, Made in Japan.
平整的離合器片摩擦面, 還有三個插pin.
背面.
符合SFI 1.1規格.
特別設計的斜面風道, 有利導風幫助散熱.
一體鍛造成型的啟動齒, 不會有脫落問題(有些廠牌是齒套套上去的, 會有崩離故障的危險).


還不錯, 等下一個東西送達, 有機會再來 安裝.

:)

沒有留言:

張貼留言